A practical reference on Gly-His-Lys: what it is, how it behaves, what the literature reports, and where the honest uncertainties sit.
This page was last updated on 2026-04-30 and is reviewed periodically as new material appears.
GHK-Cu is the copper-binding complex formed by the tripeptide glycyl-L-histidyl-L-lysine and a copper(II) ion. The free peptide is usually written as GHK, and the complex is written as GHK-Cu or Cu-GHK. The sequence was identified in human plasma and later detected in saliva and urine. Its name comes from the single-letter codes of glycine, histidine and lysine. The complex is widely described as a naturally occurring carrier of copper in blood rather than as a free peptide with its own hormonal role.
Copper binds to the peptide through the histidine imidazole nitrogen and the terminal amino group, forming a stable square-planar complex. Binding constants reported for copper(II) with GHK are high, so the peptide competes effectively for copper in solution. The complex absorbs visible light, which gives solutions a blue to violet colour. Whether the metal-free peptide has a distinct biological function of its own is still an open question; some work treats it mainly as a copper delivery vehicle, while other work reports peptide-specific effects.
The compound was first isolated from human plasma in the 1970s by Loren Pickart, who later described copper-binding activity in liver and other tissues. Early reports focused on its presence in blood and its ability to carry copper between proteins. Commercial and cosmetic use of the term 'copper peptide' has since broadened, and labels rarely distinguish GHK-Cu from other copper-binding fragments. This naming overlap makes literature searching harder, because cosmetic ingredient lists, supplier catalogues and laboratory papers use different vocabularies for the same molecule.
GHK-Cu is a coordination complex formed between the tripeptide glycyl-L-histidyl-L-lysine and a copper(II) ion. The peptide binds copper through its histidine imidazole nitrogen, its terminal amino group, and a deprotonated amide nitrogen, creating a stable chelate ring. The resulting complex carries a distinctive blue to blue-violet color, which arises from copper d-d electronic transitions. In the solid state it is usually handled as a powder, while in solution the complex can dissociate and re-form depending on pH and competing ligands. The name copper tripeptide-1 is widely used in ingredient listings.
The tripeptide was first isolated from a human plasma filtrate in 1973 during studies of tissue repair factors. Later work detected the free peptide and its copper complex in saliva, urine, and wound fluid, suggesting a natural role in tissue remodeling. Plasma concentrations reported in early literature decline with age, a pattern often cited in discussions of skin aging. Whether these endogenous levels are directly functional or largely incidental remains an open question. The peptide sequence is conserved across mammalian species.
Material described in research and cosmetic supply chains is typically a synthetic peptide supplied as a lyophilized powder. Purity is commonly reported through chromatographic separation, often at 95 percent or higher, while copper content is confirmed by separate elemental analysis. Batch variation in color and solubility can reflect residual counter-ions, moisture, or partial oxidation of the peptide. Because the complex is not a single regulatory entity, specifications differ between suppliers and are not standardized internationally.
| Property | Value | Notes |
|---|---|---|
| Sequence | Gly-His-Lys | Three amino acids; histidine supplies the main copper-binding nitrogen |
| Bound metal | Copper(II) | Coordination is described as square-planar around the metal centre |
| Appearance | Blue to violet solid | Colour originates from copper d-d electronic transitions |
| Solubility class | Freely soluble in water | Aqueous solutions are often slightly acidic |
| Common synonyms | Copper tripeptide, Cu-GHK | Ingredient lists may say only 'copper peptide' without giving the sequence |
Discovery of GHK is generally attributed to work in the 1970s that isolated a plasma factor influencing liver cell behavior. Subsequent studies identified the copper-binding tripeptide and its ability to chelate copper with high affinity. Early reports linked the complex to wound healing and tissue remodeling in animal models. The free peptide and the copper-bound form have different properties, so the two are distinguished in the literature. Whether endogenous GHK-Cu serves a single primary physiological role remains an open question.
The molecular weight and charge of GHK-Cu depend on the pH and the number of coordinated ligands. At neutral pH, the peptide typically binds one copper ion, but ternary complexes with other biomolecules can form. Spectroscopic methods such as electron paramagnetic resonance and circular dichroism are used to study the coordination environment. Reports on the exact geometry vary because the complex is dynamic in solution. Researchers often use synthetic GHK-Cu rather than extracted material to control stoichiometry and purity.
Solid GHK-Cu appears as a blue to blue-violet powder, and the colour is a direct consequence of copper coordination. The complex dissolves readily in water and in many polar solvents, while the free peptide behaves differently. Solubility in nonpolar media is low, which limits its use in oil-based systems. Solutions are typically prepared fresh because the dissolved form is more exposed to hydrolysis and to loss of the metal ion than the dry powder. Working concentrations are usually low, and preparation notes often specify the solvent and the order of addition.
Dry material is typically held at low temperature, often around minus twenty degrees Celsius, and protected from moisture and light. Copper complexes can release their metal ion under acidic conditions or in the presence of competing chelators. Hydrolysis of the peptide backbone is a slower but real pathway, and the histidine residue is susceptible to oxidation over long periods. Stability statements therefore depend on formulation, pH, and container, and they should be read as conditional rather than absolute.
Identity and purity are usually assessed with reversed-phase high-performance liquid chromatography, often paired with mass spectrometry. Copper content is measured separately by techniques such as inductively coupled plasma mass spectrometry or atomic absorption. Amino acid analysis confirms the peptide sequence after hydrolysis. Because the metal and the peptide can be quantified independently, a complete certificate of analysis normally reports both values rather than a single purity figure. This separation of measurements is important when comparing suppliers.
Most research that has been conducted on CLE peptide signaling has been conducted with Arabidopsis, since this genome contains 32 members of the CLE gene family. CLV3, which belongs to the CLE family of genes, is found within one or more tissues of Arabidopsis. All 32 members of the CLE family share two characteristics that include: encoding of a small protein with a putative secretion signal at their N- termini and contain a conserved CLE motif at or near their C-termini. The 32 members of the CLE gene family originated from mutations of the original gene.
The omega oxygenases metabolize fatty acids (RH) by adding a hydroxyl (OH) to their terminal (i.e. furthest from the fatty acids' carboxy residue) carbons; in the reaction, the two atoms of molecular oxygen(O2[ are reduced to one hydroxyl group and one water (H2O molecule) by the concomitant oxidation of NAD(P)H (see monooxygenase). CYP450 enzymes belong to a superfamily which in humans is composed of at least 57 CYPs; within this superfamily, members of six CYP4A subfamilies, (which are CYP4A, CYP4B, CYP4F, CYP4V, CYP4X, and CYP4z) possess ω-hydroxylase activity viz., CYP4A, CYP4B, and CYP4F CYP2U1 also possesses ω hydroxylase activity. These CYP ω-hydroxylases can be categorized into several groups based on their substrates and consequential function
The 5,10-methenyltetrahydromethanopterin hydrogenase (or Hmd), the so-called iron-sulfur cluster-free hydrogenase, is an enzyme found in methanogenic archea such as Methanothermobacter marburgensis. It was discovered and first characterized by the Thauer group at the Max Planck Institute in Marburg. Hydrogenases are enzymes that either reduce protons or oxidize molecular dihydrogen.
Sources: en.wikipedia.org
Combination of TMA-2 with harmaline or ibogaine has been reported to result in long-lasting episodes complicated by severe psychomotor agitation. TMA-2's affinity (Ki) for the serotonin 5-HT2A receptor has been found to be 1,300 nM. Its EC50Tooltip half-maximal effective concentration at the receptor was 190 nM and its EmaxTooltip maximal efficacy was 84%. The drug was also active at the serotonin 5-HT2B receptor and, to a much lesser extent, at the serotonin 5-HT2C receptor. In an earlier study, its affinities (Ki) were 1,650 nM at the serotonin 5-HT2 receptor and 46,400 nM at the serotonin 5-HT1 receptor. TMA-2 is inactive at the monoamine transporters. It was inactive at the mouse trace amine-associated receptor 1 (TAAR1), whereas it bound to the rat TAAR1 with an affinity (Ki) of 3,100 nM and was not assessed at the human TAAR1. In terms of metabolism, TMA-2 is known to be at least partially O-demethylated in animals in vivo. It might produce 2,4,5-trihydroxyamphetamine (THA) as a metabolite. The pharmacokinetics and metabolism of TMA-2 in humans are unknown.
ADIME, or Assessment, Diagnosis, Intervention, and Monitoring/Evaluation, is a process used to ensure high quality nutrition care to patients and clients from nutrition professionals, such as Registered Dietitians (RD) or Registered Dietitian Nutritionist (RDN). ADIME is used as a means of charting patient progress and to encourage a universal language amongst nutrition professionals. The ADIME process consists of four steps:
There have been a variety of long-overlap-based assembly methods developed in recent years. One of the most commonly used methods, the Gibson assembly method, was developed in 2009, and provides a one-pot DNA assembly method that does not require the use of restriction enzymes or integrases. Other similar overlap-based assembly methods include Circular Polymerase Extension Cloning (CPEC), Sequence and Ligase Independent Cloning (SLIC) and Seamless Ligation Cloning Extract (SLiCE). Despite the presence of many overlap assembly methods, the Gibson assembly method is still the most popular. Besides the methods listed above, other researchers have built on the concepts used in Gibson assembly and other assembly methods to develop new assembly strategies like the Modular Overlap-Directed Assembly with Linkers (MODAL) strategy, or the Biopart Assembly Standard for Idempotent Cloning (BASIC) method.
Chattopadhyay's contributions in membrane and receptor biology and biophysics have been recognized by several awards and prizes. These include The World Academy of Sciences (TWAS) Prize, Shanti Swarup Bhatnagar Award, Ranbaxy Research Award, Prof. G.N. Ramachandran Gold Medal, SERB Distinguished Fellowship, Prof. G.N. Ramachandran 60th Birthday Medal and J.C. Bose Fellowship. He is an elected Fellow of The World Academy of Sciences, Royal Society of Biology, Royal Society of Chemistry, and all the Indian Academies of Science. Fellow, The World Academy of Sciences (2017) Fellow, The Royal Society of Biology (2017) Fellow, The Royal Society of Chemistry (2013) Fellow, Indian National Science Academy (2005) Fellow, Indian Academy of Sciences (1999) Fellow, The National Academy of Sciences, India (1998) Fellow, West Bengal Academy of Science & Technology (2010) Fellow, Andhra Pradesh Akademi of Sciences (2003) Fellow, Telangana Academy of Sciences (2015) Google Scholar
Sources: en.wikipedia.org
Aspartate transaminase, as with all transaminases, operates via dual substrate recognition; that is, it is able to recognize and selectively bind two amino acids (Asp and Glu) with different side-chains. In either case, the transaminase reaction consists of two similar half-reactions that constitute what is referred to as a ping-pong mechanism. In the first half-reaction, amino acid 1 (e.g., L-Asp) reacts with the enzyme-PLP complex to generate ketoacid 1 (oxaloacetate) and the modified enzyme-PMP. In the second half-reaction, ketoacid 2 (α-ketoglutarate) reacts with enzyme-PMP to produce amino acid 2 (L-Glu), regenerating the original enzyme-PLP in the process. Formation of a racemic product (D-Glu) is very rare. The specific steps for the half-reaction of enzyme-PLP + aspartate ⇌ {\displaystyle \rightleftharpoons } enzyme-PMP + oxaloacetate are as follows (see figure); the other half-reaction (not shown) proceeds in the reverse manner, with α-ketoglutarate as the substrate.
The functional form of single-stranded RNA molecules, just like proteins, frequently requires a specific spatial tertiary structure. The scaffold for this structure is provided by secondary structural elements that are hydrogen bonds within the molecule. This leads to several recognizable "domains" of secondary structure like hairpin loops, bulges, and internal loops. In order to create, i.e., design, RNA for any given secondary structure, two or three bases would not be enough, but four bases are enough. This is likely why nature has "chosen" a four base alphabet: fewer than four would not allow the creation of all structures, while more than four bases are not necessary to do so. Since RNA is charged, metal ions such as Mg2+ are needed to stabilise many secondary and tertiary structures. The naturally occurring enantiomer of RNA is D-RNA composed of D-ribonucleotides. All chirality centers are located in the D-ribose. By the use of L-ribose or rather L-ribonucleotides, L-RNA can be synthesized. L-RNA is much more stable against degradation by RNase. Like other structured biopolymers such as proteins, one can define topology of a folded RNA molecule. This is often done based on arrangement of intra-chain contacts within a folded RNA, termed as circuit topology.
Enzymes incur catalysis by binding more strongly to transition states than substrates and products. At the catalytic binding site, several different interactions may act upon the substrate. These range from electric catalysis, acid and base catalysis, covalent catalysis, and metal ion catalysis. These interactions decrease the activation energy of a chemical reaction by providing favorable interactions to stabilize the high energy molecule. Enzyme binding allows for closer proximity and exclusion of substances irrelevant to the reaction. Side reactions are also discouraged by this specific binding. Types of enzymes that can perform these actions include oxidoreductases, transferases, hydrolases, lyases, isomerases, and ligases. For instance, the transferase hexokinase catalyzes the phosphorylation of glucose to make glucose-6-phosphate. Active site residues of hexokinase allow for stabilization of the glucose molecule in the active site and spur the onset of an alternative pathway of favorable interactions, decreasing the activation energy.
Sources: en.wikipedia.org
The letters GHK are the one-letter codes for glycine, histidine and lysine, the three amino acids in the peptide. The suffix Cu indicates that the peptide is bound to a copper ion, normally copper(II).
The free tripeptide and its copper complex have been measured in human plasma, saliva, urine and some tissue extracts. Reported concentrations vary widely between studies, and the role of the complex in normal physiology remains partly unresolved.
The plain peptide lacks the metal, so its charge, colour and binding behaviour differ. The copper complex is blue and carries a bound copper ion, while the metal-free form is colourless and has different solution chemistry.
It is a complex of the tripeptide glycyl-L-histidyl-L-lysine with a copper(II) ion. The peptide coordinates the metal through its histidine, amino terminus, and an amide nitrogen. It is often listed simply as copper tripeptide-1.